SMC SMCWEBS-N EZ Connect N Wireless Access Point/Repeater Guía de usuario Pagina 35

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 83
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 34
C
HAPTER
6
| Wireless Configuration
Basic Settings
– 35 –
The Basic Settings page allows you to configure the wireless network name
(Service Set Identifier or SSID) and set the wireless security method.
Click on “Wireless Settings,” followed by “Basic.
Figure 14: Basic Settings
The following items are displayed on this page:
Wireless On/Off — Enables or Disable the radio. (Default: Enable)
Network Mode — Defines the radio operating mode. (Default: 11g/n
Mixed)
11b/g mixed mode: Both 802.11b and 802.11g clients can
communicate with the Wireless-N Access Point/Repeater (up to 108
Mbps), but data transmission rates may be slowed to compensate
for 802.11b clients. Any 802.11n clients will also be able to
communicate with the Wireless-N Access Point/Repeater, but they
will be limited to 802.11g protocols and data transmission rates.
11b only: All 802.11b, 802.11g, and 802.11n clients will be able to
communicate with the Wireless-N Access Point/Repeater, but the
802.11g and 802.11n clients will be limited to 802.11b protocols
and data transmission rates (up to 11 Mbps).
11g only: Both 802.11g and 802.11n clients will be able to
communicate with the Wireless-N Access Point/Repeater, but the
802.11n clients will be limited to 802.11g protocols and data
transmission rates (up to 54 Mbps). Any 802.11b clients will not be
able to communicate with the Wireless-N Access Point/Repeater.
Vista de pagina 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 82 83

Comentarios a estos manuales

Sin comentarios